MicroTech DEVELOPMENT

Engineering design & contract development · Cypress, TX · Since 2016

Hardware that works where most hardware fails.

From 175 °C downhole electronics and subsea control modules to tooling on the International Space Station and spacesuit architecture, MicroTech Development designs, tests and delivers systems for oil & gas, aerospace and industrial automation.

Discuss your project See project experience

Operating envelope

Completion & drilling175 °C
Completion design life10 years
SubseaVacuum / oil-comp.
SpaceISS · EVA suit

Project experience with teams at

NASAAxiom SpaceJacobsAerodyne IndustriesRoper IndustriesSaipem AmericaEniSinopecPackers PlusDril-Quip

01 — Industries

Three industries. One standard: it has to survive the field.

Oil & Gas

Downhole and subsea electronics built for heat, pressure, shock and years of unattended service.

  • — 175 °C completion electronics
  • — MWD & mud pulse telemetry
  • — Subsea control & routing modules (SCM, SREM)
  • — ROV tooling, subsea pipe repair & inspection

Aerospace

Electronics and system architecture for human spaceflight, designed and tested to the rigor space demands.

  • — Electronic controls for ISS tooling
  • — Spacesuit system architecture
  • — Test environments & ground support

Industrial Automation

Machine monitoring and production-line automation that keeps plants running, measured and safe.

  • — Vibration monitoring & protection
  • — Conveyors, palletizing & fillers
  • — Weighing, rejection & sorting
  • — Automated test for sensitive electronics
  • — Machine safety

Featured · Downhole

The electronics that steer a well, miles underground.

A measurement-while-drilling tool reads the well's direction and the rock around it, then sends that data to the surface as pressure pulses in the drilling mud. We design the electronics, firmware and telemetry at its core, rated for 175 °C.

Inside a measurement-while-drilling tool Cross-section of a well with a drilling rig at the surface and a cutaway of the bottom-hole assembly showing the mud pulser, power section, high-temperature electronics, directional and gamma sensors, mud motor and drill bit. Mud pulses carry data up the drill pipe to a surface decoder. SURFACE DECODER MUD PULSESCARRY DATATO SURFACE Inside an MWD tool Measurement while drilling: steering data from the bottom of the well, in real time. MUD IN MUD RETURNS UP THE ANNULUS 01 · MUD PULSER 03 · ELECTRONICS 05 · MUD MOTOR Valve modulates mudpressure to send data 175 °C-rated boards,firmware & telemetry Turns the bit andsteers the well 02 · POWER 04 · SENSORS 06 · DRILL BIT Battery or turbinepower supply Inclination, azimuth& gamma ray Cuts the rockat the bottom UPHOLE ← → DOWNHOLE ILLUSTRATION · MICROTECH DEVELOPMENT

And reading the rock as the bit goes.

Logging while drilling adds gamma ray, resistivity, density and neutron sensors to the same string, so geologists see oil, water and rock type in real time.

Inside an LWD tool Concept of logging while drilling: a tool in the borehole crosses shale, water sand, oil sand, shale and limestone layers. Gamma ray, resistivity, density and neutron sensors measure the rock, and matching log curves on the right change at each layer boundary, with resistivity reading high in the oil sand. Inside an LWD tool Logging while drilling: reading the rock around the bit, so the well stays in the best zone. SHALE SAND · WATER SAND · OIL SHALE LIMESTONE 01 · GAMMA RAY Natural radioactivity tellsshale from clean sand 02 · RESISTIVITY Coils send EM waves; oil andgas read high, salt water low 03 · DENSITY Gamma source + detectorsmeasure rock porosity 04 · NEUTRON Hydrogen index shows fluidfilling the pores 05 · MEMORY + LINK Logs stored downhole; keycurves pulsed up via MWD GAMMA RAY LOW → HIGH RESISTIVITY LOG SCALE DENSITY · NEUTRON Pay zone high resistivity CONCEPT ILLUSTRATION · MICROTECH DEVELOPMENT

Featured · Space

Electronics for human spaceflight.

From control electronics for tooling aboard the International Space Station to the avionics architecture of a next-generation spacesuit for low-Earth-orbit and lunar missions, built through PDR, CDR and safety review.

The International Space Station in orbit above Earth
The International Space Station in orbitIllustration: ESA – D. Ducros
An astronaut in a spacesuit working outside the International Space Station
A NASA spacewalk outside the ISSImage: NASA

02 — Capabilities

Concept to qualified hardware.

Bring us in at any stage — a new concept, a design that needs rework, or a prototype that has to pass qualification. Safety analysis and a full test process are part of every project.

High-temperature electronics

Hybrid (bare-die) and board-level design for 175 °C service and long downhole life.

Power & communication

Subsea power distribution, routing electronics and industrial protocols.

Embedded control & firmware

Configurable alarms, shutdown logic, data logging and telemetry.

Pressure-tolerant packaging

Vacuum canisters and oil-compensated enclosures for the ocean floor.

Systems engineering

Architecture and trade studies that propose the best, most efficient devices and design, from spacesuits to subsea controls.

Safety & testing

Safety design, test plans and environmental testing on every project.

Automated test systems

Automated test mechanisms for sensitive, high-value electronics: hybrid circuits, medical and other expensive or sensitive devices.

Design for production

Optimized for volume manufacturing or for unique, limited builds, whichever the product needs.

Tools, parts & technologies

  • ARM Cortex-A / M
  • PIC · 8051 · MIPS
  • TI C2000 / C55x DSP
  • FPGA · AMD Versal / Xilinx
  • C · C++ · C#
  • FreeRTOS · µC/OS · Linux
  • Altium Designer
  • MATLAB model-based design
  • CAN bus · Modbus · Ethernet
  • Microchip · TI · NXP · ST
  • High-temp hybrid · bare die
  • I2C · SPI · UART · USB

03 — Project experience

Selected work, from the seabed to low Earth orbit.

AerospaceJacobs · NASA

Electronic controls for ISS tooling

Designed control electronics for tooling used aboard the International Space Station and in its test environments.

AerospaceAxiom Space

Spacesuit avionics architecture

As avionics technical lead, proposed and led a new System-on-Chip architecture for a spacesuit for low-Earth-orbit and lunar missions, through PDR and CDR. Boards covered power, communication, Ethernet and data storage, controlling biometrics, oxygen, thermal loops, pumps, valves, the suit display and heating.

AerospaceAerodyne · NASA

Space exploration electronics

Lead electronics design for NASA's space exploration system: a 16-channel analog board, an FPGA digital board, a radiation-aware power supply and suit cabling, verified through high-velocity impact testing.

SubseaDril-Quip

Subsea control & routing electronics

Power and communication for wellhead equipment, the Subsea Control Module (SCM) and the Subsea Routing Electronics Module (SREM): 16-channel 12-bit analog boards (4–20 mA), 32-channel digital boards, Modbus and Ethernet, and 5 kV power routing.

SubseaSaipem America

ROV tooling, pipe repair & inspection

Led control systems for an ROV, an ocean-floor pipe repair system and subsea pipe inspection tools, with electronics in vacuum canisters and oil-compensated housings. A custom HMI with laser touch switches saved up to $2M in materials. Supervised FAT and SIT, and 5.5 kV three-phase surface power.

CompletionPackers Plus

175 °C completion electronics, 10-year life

Intelligent flow-control electronics rated to 175 °C with a ten-year service life, including a hybrid bare-die BLDC motor controller with resolver feedback in a 16 mm package.

DrillingSinopec

MWD, LWD & mud pulse telemetry

Drilling and mud pulse telemetry electronics for Sinopec, plus high-temperature control electronics for MWD and LWD tools, BLDC motor drives and ARM-based data processing on embedded Linux.

AutomationRoper Industries

Vibration monitoring for cooling towers & generators

Controllers monitoring vibration, temperature and pressure on turbines, generators and cooling towers, with DSP signal processing, data logging, industrial protocols and configurable alarm and shutdown.

AutomationProduction lines

Factory & packaging automation

Conveyor systems, palletizing, weighing, rejection and sorting, fillers, and machine testing and safety.

AutomationTest systems

Automated test for sensitive electronics

Automated test mechanisms for high-value devices that can't be tested by hand: high-temperature hybrid electronics, medical devices and other expensive assemblies.

04 — How we work

Perfection is the target.

Every real product is shaped by four constraints. We treat them as the design brief, not as excuses, and still bring the product as close to the goal as it can get.

Cost

The right part at the right price, from prototype to production.

Time

Schedules planned, tracked and delivered.

Environment

Heat, pressure, vibration, vacuum and radiation, designed in from day one.

Space

Dense layouts and hybrid packaging for the tightest envelopes, down to 16 mm.

Volume production

Designed for manufacturing and test, with parts chosen for supply, yield and unit cost.

The optimum productCost · Reliability · Riskbalanced by a trade study on every design

Unique & limited builds

Maximum performance per unit, with hybrid or custom electronics where the mission demands it.

From requirement to field

  1. STEP 1

    Define

    Requirements, operating environment and safety constraints agreed before design starts.

  2. STEP 2

    Design

    Architecture, electronics, firmware and packaging, with reviews at each milestone.

  3. STEP 3

    Prototype & test

    Build and test to the real envelope: temperature, pressure, vibration and safety.

  4. STEP 4

    Deliver

    Documentation, production hand-off and field support.

Ashkan Golestani, CEO of MicroTech Development
Ashkan GolestaniFounder & CEO

05 — About

Engineering experience across energy and space.

MicroTech Development is led by Ashkan Golestani, CEO, with 30 years of experience in embedded systems design and a Master’s degree in Electronics Engineering, specializing in solid-state electronics. He has led engineering teams through PDR and CDR on NASA programs, writing statements of work, managing vendors and mentoring engineers.

His rule is simple: do it right the first time. Every design accounts for the whole system: mechanical, hydraulic, electronics, material selection, safety, quality, testing and cost, all within the project timeline. Fifteen years of teaching at the university level shape the rest of his approach: clear communication and real knowledge transfer, so your team understands the design as well as we do.

M.S. Electronics Engineering · Solid State 30 years in embedded design 15 years university teaching AMD Versal Adaptive SoC · 2024

06 — Contact

Have a hard engineering problem?

Tell us about the environment, the timeline and where you are stuck.

LocationCypress, Texas